Mazda RX-8 Rear Anti-roll Bar / Rear Sway Bar / Rear Stabilizer Bar
Specification: 19mm Solid (Standard 16mm Hollow)
Strut Bars and Chassis Strengthening Technology:
If youâ€™re serious about your carâ€™s handling performance, you will first be looking at lowering the suspension. In most cases, unless youâ€™re a complete petrol-head, this will be more than adequate. However, if you are a keen driver, you will be able to get far better handling out of your car by fitting a couple of other accessories to it. The first thing you should look at is a strut brace.
When you corner, the whole carâ€™s chassis is twisting slightly. In the front (and perhaps at the back, but not so often) the suspension pillars will be moving relative to each other because thereâ€™s no direct physical link between them. They are connected via the car body, which can flex depending on its stiffness.
A strut brace bolts across the top of the engine to the tops of the two suspension posts and makes that direct physical contact. The result is that the whole front suspension set-up becomes a lot more rigid and there will be virtually no movement relative to each side. In effect, youâ€™re adding the fourth side to the open box created by the subframe and the two suspension pillars.
Is there a need to have our vehicle chassis strengthened?
The chassis of the car is the part which experiences the most of the abuse from the driver. It is particularly due to the weight transfer of the vehicle body during fast cornering, hard braking or hard acceleration. In some instances, the weight transfer during cornering may cause one side of the vehicle to experience as much as 3 times more force than the other side of the vehicle, causing enormous chassis flex/ vehicle body deformity and twist, consequently causing tires to lose grip. Deformity and twisting of the vehicle chassis during cornering may cause negative handling traits such as under-steering and over-steering.